Meba Photoelectric Sensor G50-4A50JC
Product Description
Meba Photoelectric Sensor G50-4A50JC using reflection type in parallel, the mutual spacing should be kept at over 1.4 times detection distance.Meba Photoelectric Sensor G50-4A50JC
|
MPDEL |
G50-4C10JC |
G50-4B5JC |
G50-4A50JC |
|
Type |
Through Beam |
Retroreflective |
Diffuse Type |
|
Detect distance |
10m |
0.1-5m |
500mm |
|
Detect target |
Opaque materials of Min 16mm |
Opaque materials of Min 60mm |
Transpqrent, translucent, opaque materials |
|
Hysterisis |
———— |
————— |
20% Max, at detecting distance |
|
Response time |
Max 20mS |
Max 20mS |
Max 20mS |
|
Power voltage |
AC 24-240V DC 24-240V |
AC 24-240V DC 24-240V |
AC 24-240V DC 24-240V |
|
Sensitivity |
———— |
—————- |
Adjustable by VR |
|
Operating mode |
Light on/off select by slide switch |
Light on/off select by slide switch |
Light on/off select by slide switch |
|
Control output |
Relay output |
Relay output |
Relay output |
|
Protection |
IP54 |
IP54 |
IP54 |
Meba Photoelectric Sensor G50-4A50JC
Method of anti mutual-interference and cautions:
-Mutual cross installation of optic projector and photo-receptor.
-When using reflection type in parallel, the mutual spacing should be kept at over 1.4 times detection distance.
-The mains voltage should be within the range of operating.
-The following installation occasions will result in error action, take note of:
1. Dusty occasion
2. The occasion with corrosive gas
3. The occasion directly spattered with water, oil and agent etc
4. Outdoor or the occasion directly shine by hard light like sunlight
