Electrical Accessories
Meba Power Built-in Type Photoelectric Switch BX5M-MFR
Product Description
Meba Power Built-in Type Photoelectric Switch BX5M-MFR using reflection type in parallel, the mutual spacing should be kept at over 1.4 times detection distance.Meba Power Built-in Type Photoelectric Switch BX5M-MFR
| Type | Free voltage, Relay contact output | |
| Model | Retroreflective(*1) | |
| BX5M-MFR | ||
| Dimension | W25*H67*L81 | |
| Detecting Distance | 0.1-5m | |
| Detecting Target | Opaque materials of Min. Φ60mm | |
| Hysterisis | —– | |
| Response Time | Max.20mS | |
| Power Supply | 24 TO 240VAC±10%50/60Hz, 24-240VDC±10%(Ripple P-P: Max10%) | |
| Sensitivity | —– | |
| Operating | Selectable light ON/D or Dark ON by slide switch | |
| Control Output | Relay contact output | Capacity:30VDC 3A Resistive load, 250VAC 3A resistive load |
| Contact orde: 1C | ||
| Self-diagnostic Output | Green LED turns on at unstable operation | |
| Timer Function | ON delay, OFF delay, selectable one shot delay by slide switch | |
| Delay time: 0.1 to 5 sec adjustable by VR | ||
| Protection | IP54(IEC Standard) | |
Meba Power Built-in Type Photoelectric Switch BX5M-MFR
Meba Power Built-in Type Photoelectric Switch BX5M-MFR Method of anti mutual-interference and cautions:
-Mutual cross installation of optic projector and photo-receptor.
-When using reflection type in parallel, the mutual spacing should be kept at over 1.4 times detection distance.
-The mains voltage should be within the range of operating.
-The following installation occasions will result in error action, take note of:
1. Dusty occasion
2. The occasion with corrosive gas
3. The occasion directly spattered with water, oil and agent etc
4. Outdoor or the occasion directly shine by hard light like sunlight
Inquiry Form - lucy from Meba
If you would like a quotation or further information on this product, please fill in the form below and we will reply to you within 1 working day.
